APC Smart-UPS 5000VA Uninterruptible Power Supply 4000W (SUA5000RMT5U)

Description

SmartSlot

Customize UPS capabilities with management cards.

Cold-start capable

Provides temporary battery power when the utility power is out.

Serial Connectivity

Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC’s Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.

Resettable circuit breakers

Enables a quick recovery from overload events.

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Adjustable voltage-transfer points

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Adjustable voltage sensitivity

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Audible alarms

Provides notification of changing utility power and UPS conditions.

Serial Connectivity

Provides management of the UPS via a serial port.

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.

Rack/Tower convertible

Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Network manageable

Provides remote management of the UPS over the network.

Adjustable voltage sensitivity

Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.

LED status indicators

Quickly understand unit and power status with visual indicators.

Additional information

Weight	111.13013 kg
Output power capacity	5000 VA
LED indicators	Y
Nominal output voltage	208 V
Dimensions (WxDxH)	483 x 660 x 222 mm
Input connection type	NEMA L6-30P
Output connections	2x NEMA L6-20R\n2x NEMA L6-30R
Interface	DB-9 RS-232, SmartSlot
Non-operating altitude	0 – 15000 m
Operating altitude	0 – 3000 m
Storage temperature (T-T)	-15 – 45 °C
Operating temperature (T-T)	0 – 40 °C
Certification	CSA,FCC Part 15 Class A,UL 1778, RoHS 7b
Cable length	2.44 m
Output power	4000 W
Product colour	Black
Hot-swap battery	Y
Battery recharge time	3 h
Typical backup time at half load	26.7 min
Typical backup time at full load	9.4 min
Battery technology	Sealed Lead Acid (VRLA)
Audible alarm(s)	Y
Noise level	53 dB
Emergency Power Off (EPO)	Y
Input frequency	50/60 Hz
Nominal input voltage	208 V

Product Enquiry

Name

Email address

Enquiry