Intel SSD D3-S4510 Series 240GB, 2.5in SATA 6Gb/s, 3D2, TLC (SSDSC2KB240G801)
$139.99
240GB, 6.35 cm (2.5″) , Serial ATA III, 3D2 TLC
- Description
- Additional information
- Reviews (0)
- Product Enquiry
Description
Enhanced Power Loss Data Protection
Enhanced Power Loss Data Protection prepares the SSD for unexpected system power loss by minimizing data in transition in temporary buffers, and uses on-board power-loss protection capacitance to provide enough energy for the SSD firmware to move data from the transfer buffer and other temporary buffers to the NAND, thus protecting system and user data.
Hardware Encryption
Hardware encryption is data encryption done at the drive level. This is used to ensure that the data stored on the drive is secured from unwanted intrusion.
Temperature Monitoring and Logging
Temperature Monitoring and Logging uses an internal temperature sensor to monitor and log airflow and device internal temperature. The logged results can be accessed using the SMART command.
End-to-End Data Protection
End-to-End Data Protection ensures integrity of stored data from the computer to the SSD and back.
Additional information
| Weight | 0.45359 kg |
|---|---|
| Solid-state drive capacity | 240 GB |
| Operating shock | 1000 G |
| Intel High Endurance Technology (HET) | N |
| Intel® Rapid Start Technology | N |
| Intel® Remote Secure Erase | N |
| Intel® Smart Response Technology | N |
| Operating temperature (T-T) | 0 – 70 °C |
| Operating vibration | 2.17 G |
| Non-operating vibration | 3.13 G |
| Non-operating shock | 1000 G |
| Product colour | Silver |
| Product type | 19 |
| Product family | Data center SSD |
| Product series | Intel® SSD D3-S4510 Series |
| Product codename | Youngsville Refresh |
| Launch date | Q3'18 |
| SSD endurance rating | 0.9 PBW |
| SSD power consumption (active) | 2.4W |
| Power consumption (idle) | 1 W |
| SSD form factor | 2.5" |
| Solid-state drive interface | Serial ATA III |
| Latency (write) | 37 µs |
| Read speed | 560 MB/s |
| Write speed | 280 MB/s |
| Component for | Server/workstation |
| NVM Express (NVMe) supported | N |
| Memory type | 3D2 TLC |
| NAND flash type | TLC (Triple Level Cell) |
| Latency (read) | 36 µs |
| Random read (100% span) | 90000 IOPS |
| SSD ARK ID | 134910 |
| Random write (100% span) | 16000 IOPS |
| End-to-End Data Protection | Y |
| Enhanced Power Loss Data Protection technology | Y |
| Hardware encryption | Y |
| SSD temperature monitoring | Y |
| Uncorrectable Bit Error Rate (UBER) | 1 sector per 10^17 bits read |
| Mean time between failures (MTBF) | 2000000 h |
| Status | Launched |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.