APC Smart-UPS SRT 3000VA RM 120V Network Card (SRT3000RMXLA-NC)
$5,764.99
APC Smart-UPS SRT 3000VA RM 120V Network Card (SRT3000RMXLA-NC)
- Description
- Additional information
- Reviews (0)
- Product Enquiry
Description
SRT3000RMXLA-NCFeatures
APC Smart-UPS SRT 3000VA RM 120V Network Card
High density, double-conversion on-line power protection with scalable runtime
Includes : CD with software , Documentation CD , Installation guide , Network Management Card , Rack Mounting brackets , Rack Mounting support rails , USB cable , Warranty card
– 10/100 BaseT Connection
Connect the device to a network using a 10 or 100 BaseT connection
– Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
– ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
– Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
– LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
– Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Serviceability
– Audible alarms
Provides notification of changing utility power and UPS power conditions
– Disconnected battery notification
Warns when a battery is not available to provide backup power.
– Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
– Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
– User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Protection
– Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
– Cold-start capable
Provides temporary battery power when the utility power is out.
– Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
– Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
– Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
– Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
– Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Manageability
– Network manageable
Provides remote power management of the UPS over the network.
– Serial connectivity
Provides management of the UPS via a serial port.
– SmartSlot
Customize UPS capabilities with management cards.
– LED status indicators
Quickly understand unit and power status with visual indicators.
– InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Adaptability
– Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
– Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
– Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Availability
– Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
– Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
– Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
– Scalable runtime
Allows additional run time to be quickly added as needed.
– Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
– Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Marketing Features
– Avoids costly power problems by keeping your IT equipment and data protected and available.
Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
– Low operating and maintenance costs with proven reliability and intelligent battery management.
Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
– Save time with easy and convenient remote accessibility.
Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
– Peace of mind that comes with full equipment compatibility and reliability of a leader
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
Additional information
| Weight | 45.35924 kg |
|---|---|
| UPS topology | Double-conversion (Online) |
| LED indicators | Alarm,Status |
| Battery recharge time | 3 h |
| Hot-swap battery | Y |
| Automatic battery test | Y |
| Cold start | Y |
| Replacement battery cartridge | APCRBC152 |
| Form factor | Rackmount/Tower |
| Product colour | Black |
| Rack capacity | 2U |
| Cable length | 2.44 m |
| Display | LCD |
| Number of batteries supported | 1 |
| International Protection (IP) code | IP20 |
| Energy Star certified | Y |
| RoHS compliance | Y |
| Certification | CSA C22.2 No.107.3-05, FCC Part 15 Class A, OSHPD, UL 1778 |
| Operating temperature (T-T) | 0 – 40 °C |
| Storage temperature (T-T) | -15 – 45 °C |
| Operating relative humidity (H-H) | 0 – 95% |
| Storage relative humidity (H-H) | 0 – 95% |
| Operating altitude | 0 – 3000 m |
| Battery life (max) | 5 year(s) |
| Battery capacity | 454 VAh |
| Output power capacity | 3000 VA |
| Output voltage Total Harmonic Distortion (THD) | 2% |
| Output power | 2700 W |
| Waveform | Sine |
| Input operation voltage (max) | 120 V |
| Input frequency | 40 – 70 Hz |
| Output operation voltage (max) | 120 V |
| Output frequency | 50/60 Hz |
| Automatic Voltage Regulation (AVR) | Y |
| Surge energy rating | 340 J |
| Crest factor | 3:1 |
| Audible alarm(s) | Y |
| Battery technology | Sealed Lead Acid (VRLA) |
| Web-based management | Y |
| Auto-restart | Y |
| AC outlet types | NEMA 5–20R,NEMA L5-30R |
| Power plug | NEMA L5-30P |
| AC outlets quantity | 9 AC outlet(s) |
| USB port | Y |
| Serial interface | Y |
| Serial interface type | RJ-45 |
| Ethernet LAN (RJ-45) ports | 1 |
| SmartSlot | Y |
| Quantity per pallet | 6 pc(s) |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.